products
Through rigorous quality management, we strive to ensure product reliability.

L.M SHAFT plating rod

This product is exclusively used for ball bush shaft. It is economical, and suitable for the working environment that corrosion may occur, or for the poor working environment.

  • Material
    KS.STB-2(JIS:SUI-2)
  • High-frequency Quenching
    High-frequency Quenching
  • Hardness
    HRC 60-64
  • Hardening Layer
    0.8㎜ - 3㎜
  • Surface Roughness
    Under 1.5㎛Rmax
  • D. Tolerance
    g6(g5)
  • Chrome layer
    0.015㎜ - 0.03㎜(Other dimensions can be manufactured by the customer's order)
  • Products

    Outer diameter(mm)
    Designation

    Allowable limit of outer diameter(㎛)

    Standard length(㎜)
    Effective case depth
    Weight
    Outer diameter(mm)
    MJ g 6 h 5 h 6 500 1000 1200 1500 2000 2500 3000 3500 4000 5000 6000 depth(㎜) kgf/m
    4 MJ4 -4 ~ -12 0 ~ -5 0 ~ -8 Over 1.0 0.23 4
    5 MJ5 5
    6 MJ6 6
    8 MJ8 -5 ~ -14 0 ~ -6 0 ~ -9 0.40 8
    10 MJ10 0.62 10
    12 MJ12 -6 ~ -17 0 ~ -8 0 ~ -11 0.89 12
    13 MJ13 1.04 13
    16 MJ16 1.58 16
    20 MJ20 -7 ~ -20 0 ~ -9 0 ~ -13 Over 1.5 2.47 20
    25 MJ25 3.85 25
    30 MJ30 Over 2.0 5.55 30
    35 MJ35 -9 ~ -25 0 ~ -11 0 ~ -16 7.55 35
    40 MJ40 Over 2.5 9.87 40
    50 MJ50 15.4 50
    60 MJ60 -10 ~ -29 0 ~ -13 0 ~ -19 Over 3.0 22.2 60
    80 MJ80 39.5 80
    Standard stock Quasi-stock Product by order
    • The non-standard product can be manufactured by order only.(Unit m/m)
    • (See standard dim, in stock, other grades on request)