products
Through rigorous quality management, we strive to ensure product reliability.

Heat treated plating rod

High frequency quenching : Hard chromiun plating shaft for rust prevention.

  • Material
    S45C
  • Surface Roughness
    ≤ 0.8S
  • D. Toerance
    f6(f8)
  • Straightness
    ≤ 0.2mm/1m
  • Chrome layer
    0.015mm ~ 0.025mm (Other dimensions can be manufactured by the customer's order)
  • Products

    Outer diameter(㎜) Designation Allowable limit of outer diameter(㎛) Standard length(㎜) Outer diameter(㎜)
    Over Under MCC f 7 f 8 f 8 500 1000 1200 1500 2000 2500 3000 3500 4000 5000 6000 Over Under
    2 MCC -10 ~ -22 -10 ~ -28 0 ~ -18 3 6
    3 6 MCC
    6 8 MCC -13 ~ -28 -13 ~ -35 0 ~ -22 6 8
    8 10 MCC 8 10
    10 14 MCC -16 ~ -34 -16 ~ -43 0 ~ -27 10 18
    14 18 MCC 14 18
    18 24 MCC -20 ~ -41 -20 ~ -53 0 ~ -33 18 24
    24 30 MCC 24 30
    30 40 MCC -25 ~ -50 -25 ~ -64 0 ~ -39 30 40
    40 50 MCC 40 50
    50 65 MCC -30 ~ -60 -30 ~ -76 0 ~ -46 50 65
    65 80 MCC 65 80
    80 100 MCC -36 ~ -71 -36 ~ -90 0 ~ -46 80 100
    100 120 MCC 100 120
    120 140 MCC -43 ~ -83 -43 ~ -106 0 ~ -63 120 140
    140 160 MCC 140 160
    Standard stock Quasi-stock Product by order
    • The non-standard product can be manufactured by order only.(Unit m/m)
    • (See standard dim, in stock, other grades on request)